Elongated Cartridges for BROTHER LC101, LC103, LC105, LC107 and more - Original Chips Required

Elongated Cartridges for BROTHER LC101, LC103, LC105, LC107 and more - Original Chips Required

$32.95
$32.95
Sold out

Our refillable cartridges were created to simplify the refilling of BROTHER printers. Refilling InkPot's refillable cartridges is as easy as counting one, two, three. 1- Remove the cap. 2- Inject ink. 3- Replace the cap. That's all!

The cartridges can contain up to 100ml of black ink or 80ml of colour ink which means refills won't be too frequent.

 

  

This product does not include any chip. To use it, you must transfer the four chips from your original cartridges. Our instructions will show you how.

With this product, accurate ink levels won't be displayed by the printer. However, the printer will never stop you from printing thanks to its ink sensor. If the cartridges actually have ink inside, the printer will print. If you would like your printer to display accurate ink levels, see our chip resetter for LC103.

Note that the cartridges are transparent, so you can always know how much ink you have in it.

 

NOTE REGARDING THE PRINTER'S DOOR

If you have a MFC-J4310DW, MFC-J4410DW, MFC-J4510DW, MFC-J4610DW or MFC-J4710DW printer:
For these extra-long cartridges to fit into the printer, the door must be removed. This is very easy. Our instructions will show you how. Once the door has been removed, you can install the included door clip. This clip will activate the door sensor so that the printer can print even with the door removed. For those who would rather not remove the door, see our small refillable cartridges.

For any other printer model:
For these extra-long cartridges to fit into the printer, the door must be removed. This is very easy. Our instructions will show you how. To print even with the door removed, you will need to activate the door sensor. A Phillips screwdriver, a 4 inch nail, or even a brown plastic coffee stirrer all can activate the sensor. See the photo on the right. Our instructions will show you how to find the sensor. Note that we also sell small refillable cartridges that fit inside the printer normally with the door closed as usual.


The refillable cartridges installed in the printer.

 

The cartridges supplied with this product are empty. You will also need to purchase an ink refill kit for BROTHER printers.

This product contains the following:

  • 100ml black refillable cartridge
  • 80ml cyan refillable cartridge
  • 80ml magenta refillable cartridge
  • 80ml yellow refillable cartridge
  • 4 air filters
  • Door clip (MFC-J4310DW, MFC-J4410DW, MFC-J4510DW, MFC-J4610DW, MFC-J4710DW printers)
  • Easy and detailed instructions with pictures